cart Shopping Cart Shopping Cart
Power Booster
larger imageMove mouse over the image to magnify

Power Booster

Power Booster by Pressure Lift
NZ $1,790.00
The POWER BOOSTER is designed to snap easily onto the end of a suction hose line, to increase performance and reduce pumping time.

Available in 2 inch, 3 inch, 4 inch and 6 inch this lightweight compact unit is rugged enough to handle heavy sludge, septic waste, sand and hazardous wastes such as grease and oil.  Solid engineering coupled with lightweight construction make the Power Booster the ultimate pumping solution.  Power Booster will shorten project time while cutting maintenance costs.

Give your vacuum pump a boost! 

"This device does everything they say it will!  I had a residential septic tank to pump, with a long steep 85 metre pull.  The vertical lift was approx. 15 metres.  With a 3 inch hose, I pumped it out in 25 minutes!  Without Power Booster this pumping would have taken several hours"   -Mel


- Septic Pumping - Lift Stations - Liquid Waste Removal
- Refineries - Environmental - Mining
- Marine - On/Offshore Drilling - Pipe Cleaning
- Construction - Leachate Collection - Grease & Oil Collection
- Hydro Excavation    

The Power Booster fluid-conveyance pumping nozzle is a compact, fluid-operated, vacuum assisted waste recovery nozzle replacing pressure discharge pumps.  These compact units are designed to operate in hazardous and non-hazardous was removal, safely pumping materials such as grease, oil, heavy sludge, septic, tank bottoms, sand and more.

Unlike any other system on the market, the Power Booster can work with liquid or sludge materials.  Designed to work as a single unit or in series, wastes can be conveyed vertically and horizontally without limitation.   One unit can  move sludge over 61 metres vertically, suspending heavy solids in the infused fluid stream.  Stacking the Power Booster system is series, waste materials can be conveyed continuously without restriction.

The application of the Power Booster system makes it the most versatile and unique waste recovery system available to the pumping industry today.  It's simple, lightweight design makes installation as simple as a snap of the camlocks.

Power Booster w Hose - Copy

The Power Booster is manufactured with male camlocks at each end to adapt to various applications.
It may be utilized as a single unit at the end of the line to increase vertical lift well beyond 30m, or in series to vacuum liquids and sludges to any height.
It is also designed to be inverted for a variety of mixing, stirring, trenching or unloading.
When placed in series, your vertical lift limitations virtually disappear.  For hose runs 100 - 150 metres, place on at the end of the vacuum hose and one equal distance between the end of the hose and the vacuum unit.  For longer runs continue placing a Power Booster approximately every 120 metres.

Due to it's light-weight design it does not have to be lowered with heavy equipment like diaphragm pumps or other weighty equipment.  It can be easily installed on any vacuum equipment without any modifications. 
The Power Booster pumping nozzle can be used conveniently on vacuum equipment and easily removed for compact storage.  Because of the Power Booster's unique design it can be installed in series, in tandem or even inverted for use in slurry suspension, hydro-excavation and unloading.  Because the Power Booster pumping nozzle is so light weight, compact and easy to install it has already been used on 1000's of projects worldwide.  Because of it's fluid-conveyance operation which contains no moving parts, it is fundamentally safe and can be placed almost anywhere.

Power Booster Graph(copy)

"I had three 10 metre hoses, of which about 6 metres was on level ground.  The rest was up a steep driveway by a lake.  It took 20 minutes to pump 3,800 litres.  It took me longer to get out the hoses and put them back than it did to do the job with the Power Booster"


You might also be interested in ...

About Allflow

Allflow specialises in providing innovative, high quality pumping equipment and vacuum tanker products for industrial requirements that will exceed expectations.

Read more >
Contact Information
Phone: 03 543 9057
0800 255 356
58 Gladstone Road
Richmond 7020
New Zealand