Davey 5155H Single Stage Honda Powered Firefighter Pump

Applications:

• Firefighting
• Tanker to tanker water transfer
• High head general water transfer
• Sheep jetting
• Irrigation
• Boom spraying

Key features:

• Patented clamped impeller design to enable longer impeller life, improved performance and easier disassembly in the case of blockage.
• Single stage design provides the versatility of high flow rates with strong pressure.
• Thrust balanced impeller design to extend engine life.
• Pump casing, diffusers and impellers manufactured from quality corrosion resistant marine grade aluminium for long life.
• Choice of 3 or 4 way (dependant upon model chosen) discharge port for easy installation with a choice of plumbing sizes.
• Polyester coated pump casing, exterior and interior, for added corrosion resistance.
• Patented floating impeller neckrings front and back. The front neckring helps improve pumping efficiency, the back
• neckring helps extend seal life and dramatically reduce engine wear.
• Self priming from 7m for more versatile installation options.
• Large priming and drain port with bayonet fit plugs. Plugs have safety retention system, plus are available with 1/4”
• tapping to accept pressure gauges or drain cocks.
• Low-oil protection on all models - engines won’t start or run if oil level is inadequate, thus protecting your engine.
• Electric start models have electric starter (battery and leads required) and recoil starter fitted, ensures a choice of starting methods, even if the battery is flat or removed.
• All engines conform to the tough environmental requirements of the USA EPA and CARB standards, to help look after the environment.

Operating limits:

• Flow capacities: to 500 lpm
• Maximum total head: 72m
• Maximum suction lift: 7m
• Maximum water temperature: 50ºC
• Minimum water temperature: 1ºC
• Maximum casing pressure: 1000kPa
• Minimum suction pipe size: 1 1/2”
• Suction pipe strainer: Required
• Inlet size 1 1/2” or 2” (depends on model)

Materials of construction:

• Suction cover: Marine grade aluminium (AS605)
• Diffuser: Marine grade aluminium (AS605)
• Impeller: Marine grade aluminium (AS605)
• Casing / yoke: Marine grade aluminium (AS605)
• Mechanical seal: Carbon / ceramic
• Discharge / handle: Marine grade aluminium (AS605)
• Casing bolts: Zinc plated steel
• Yoke bolts: Stainless Steel
• Flap valve / seal ring: Zinc body, hytrel seal
• Neck ring, priming and drain plug: Glass filled nylon
• Casing, priming and drain plug oring Nitrile rubber
• Discharge gasket: Hytrel
• Paint finish: Baked polyester powder coat

Engine specifications:

• Honda GX160 Engine
• Engine capacity (CC): 163
• Inlet: 1 ½” (4way)
• Outlet: 1 ½” (4way)